Tips

Emergency Plumbers – Tips to Find the Best

Emergency Plumbers – Tips to Find the Best

Do you need an emergency plumbing service? Are you looking for a professional plumbing help for your residence or commercial space? Then here we are giving information on choosing the best professional plumber in your locality. The Cape Town has got many professional plumbers who can mend your leaks as and when you get in touch with them. They are best known for their immediate and emergency services that are designed to provide best in class support.

Whether it is your residential space or commercial space, the best plumbers are good at providing the one-stop solution for all your plumbing requirements. All you got to do is to find the one in your locality who can assist you in time. They should be well-known across the country for their expert and committed services.

These well-known plumbers are mostly known for their emergency services in times of uncertainty and provide an instantaneous solution to all your plumbing issues. They continuously invest in their technology and people to keep up, to the demands of their clients. The technology they adopt would make the work much easier while being cost effective.

They are mostly experts in providing services on time in a very cost effective manner to their residential and commercial customers. The plumbing technology they adopted can provide a one-time solution to all your plumbing issues. Adoption of such technology by the plumbers would ensure longevity to your plumbing requirements.

The plumbing service companies offer a turnkey solution to all plumbing issues while keeping in view the best of industrial practices. The plumbing team has experts who are well trained and groomed to support the clients instantaneously especially in times of emergency. These companies offer the wide variety of services such as 24Hour plumber, Kitchen bathroom fitters, Geyser Repairs, Installation & Maintenance, drain blocking and so on.

They have the expert team who can respond to emergencies in each and every kind of service they provide. They have teams spread in and around the city limits and have their presence in few places in and out too. The emergency teams of these plumbing companies respond to their clients throughout the day and make sure they provide the apt solution to the issues. You just got to get in touch with the company at your locality and must explain your problem rightly.

These plumbers are committed to their work and go an extra mile to get an appropriate solution to all your plumbing issues. The motto of such highly recommended plumbers is to bring back your happiness on time.

Learn More »



Source: http://ezinearticles.com/?Emergency-Plumbers—Tips-to-Find-the-Best&id=9611976

Author: [author]

Home Renovation – Tips For a Good Paint Job Will Increase Your Selling Price

Home Renovation – Tips For a Good Paint Job Will Increase Your Selling Price

Of all the trades involved in house renovation the one that most people are prepared to do themselves is painting. Why then do you think a painter trains for four years to learn the necessary skills and can you really do as good a job?

We all want to save money when renovating. It may be that you are selling and want to increase the perceived value and speed of sale so you whip out the paint brushes and rollers.

1. Do not take on too many areas at once. If you are still living in the house just tackle one room at a time.

2. Take your time to mask any areas which need to be protected. If you have a steady hand then you should be able to cut in around windows and doors and on the skirting boards.

3. Use plaster to repair any holes or dents in the walls. Sand properly and do a brush coat over the repair before rolling. To speed the drying time of patches use a hair dryer. For deeper holes, partially fill, allow to dry to add some more.

4. Spend a few dollars on good quality paint brushes. You will get a better finish and far fewer brush hairs will end up on the wall.

5. Use a 2 inch or 50Ml brush for your cutting in and a 3 inch or 75 Ml brush for larger areas such as for painting the ceiling cornice.

6. Use heavy drop sheets. Many DIY painters will drag out some old bed sheets but any spilled paint will soak through to your floors or furniture.

7. Use a specific water based ceiling paint. Even if you want the same color for your ceiling and walls you need a proper ceiling paint. Anything with sheen will show up imperfections with lighting.

8. Work from the top down. Firstly cut in the ceiling color on the cornice. Then cut around any lights or ceiling fans. Next roll the ceiling. Remember that rollers can spray paint not in your eyes but anywhere in the room. If you get spray on the window glass leave it until it dries then use a scraper to clean it off.

9. For walls it is best to use water based low sheen paint. You do not want high reflection.

10. Cut in up to your cornice, around your doors and windows and your skirting boards, about two inches. If you are going to paint your skirting boards with gloss paint do not get the water based wall paint on it.

11. Roll your walls do not brush them. Always cut then roll for each coat. Ensure the paint is completely dry before recoating. Cold wet or very humid weather will slow down your drying time.

12. If you are painting oil based gloss on the skirting boards over existing water based paint you will need to use a primer coat.

13. Doors can be painted with a full oil based gloss if they are new. But in an older home it's best to use a semi gloss water based paint as it will not show up the bumps and imperfections in the doors. You must cut in the edges with a brush but roll as much of the door as possible.

Learn More »



Source: http://ezinearticles.com/?Home-Renovation—Tips-For-a-Good-Paint-Job-Will-Increase-Your-Selling-Price&id=3934406

Author: [author]

Tips for Choosing the Right Survival Tools and Equipment

Tips for Choosing the Right Survival Tools and Equipment

Just about everyone these days is thinking about emergency preparedness these days. They are collecting food, water and supplies for 72 hours or more, depending on the person or family. It is not just about these though, you also need to think about survival tools and equipment. Survival tools can include multipurpose knives, and equipment means things like flashlights that are self powered, fuel sources that can be stored for long periods of time, etc. It is not just about home preparedness either, but for your vehicle, because it is just as likely that you will get stranded in your car somewhere as a disaster happening.

Here are a few of the many examples of survival tools and equipment that you need to consider when you are preparing for emergency situations. One of the most important thing about a survival tool is that it one tool needs to serve as many functions as possible. Consider the multifunctional Swiss Army knife. We are not talking about any cheap dollar store knock off either. Made from heavy duty lemar, this knife is many different tools in one. In addition to having a utility knife, it includes a can and bottle opener, flat as well as Phillips screwdrivers, corkscrew, fish scaler and hook remover. There is also scissors, a rope and wood saw, as well as a tooth pick and tweezers. These knives are highly versatile, and do not have to be expensive, just around twenty dollars for a high quality one.

Another example of survival tools and equipment is the Compact Multifunction Shovel. This survival tool can come in handy in a variety of emergency situations. It is extremely lightweight for one. There are three different edges on the blade, shovel, saw, and hatchet. The blade also has a hammer head, wrench as well as a nail puller and bottle opener. The handle is hollow, the cap features a solid liquid filled compass. Inside there is a razor utility blade, a box of waterproof matches, as well as basic fishing gear. This is one of the most perfect models to keep in your home, or pack away in the car. This product sells for just around twelve dollars.

Flashlights and radios are also very important pieces of survival tools and equipment. It is not just about keeping these survival tools around, but also choosing the right type. Batteries run down, and even rechargeable ones are of no use if there is not a power source to charge them back up. Instead of buying products that use batteries, consider ones that have solar panels built into them, or that have a hand crank to power the unit. Some radios will run for more than two hours after being hand cranked for just a few minutes. Solar panels can charge up a flashlight in a matter of hours, powering it for most of the night, depending on use. Prices vary, depending on the quality and features of the product.

There are many more examples of survival tools and equipment . It is a good idea to choose your survival tools carefully, making sure that they are made from high quality materials and construction. While you may not use them on an every day basis, you want them to work when you do need them. It is also a good idea to check your survival tools at least every six months, just to check and see if they are still in good working condition.

Learn More »



Source: http://ezinearticles.com/?Tips-for-Choosing-the-Right-Survival-Tools-and-Equipment&id=5365389

Author: [author]

How to Choose a Plumber – 3 Essential Tips!

How to Choose a Plumber – 3 Essential Tips!

How to choose a plumber is a skill Everyone is going to ever need because there are always going to be times in our lives where we will need to call a plumber or heating engineer and in most cases it is going to be because of a crisis or emergency. In those times of crisis it is easy to feel vulnerable and not know who to trust. In this article I'm going to give you 3 important guidelines on how to choose a plumber so that you are rest assured you are choosing the right one.

1. Want a Professional Job? Then Only Hire a Professional Plumber!

The first tip is the most important. Go with a professional plumbing company, not a friend of a friend or your cousin Bill. Why? First and foremost a trained professional is going to be up-to-date on all the latest advances in the plumbing and heating industry. What might seem like a small job to a novice could easily turn into an out of control mess, you want to make sure your plumber has the skills to handle the most difficult situations. Think about it, your home's plumbing system is essential to your comfort, safety, and even your health so it's important to find a trained professional who specializes in plumbing, heating, and cooling to get the job done right the first time.

How do you know you are hiring a professional? Ask for their license and make sure they are licensed and insured in your state. They should also have a regularly answered landline telephone number and their physical address should be on all their paper work and website. And most professional plumbers will accept credit card payments.

2. Get References!

These days it's so easy to flip through the yellow pages or do a search online to choose a plumber, but how do you really know who you're hiring? The best way to narrow the search is to ask friends and family if they have any referrals. Do they recommend a plumbing company that they have had a great experience with? Ask friends and family if they can recommend a plumber with reasonable prices who is friendly, clean, respectful, and punctual.

If no friends and family are available to give you referrals you can do a search online to see how a plumbing company is rated by the Better Business Bureau. You only want to go with a company with an A + rating.

Another good indicator that a plumbing company is top notch, is the length of time they've been in business. A company that has been around for over ten, twenty, or even thirty years has very kindly stood the test of time because of their outstanding service.

3. Pay by the Job Not the Hour!

If you do not want to incur any hidden fees or surprises, it is best to go with a company that quotes you a price upfront instead of by the hour. They should also offer you a free consultation before a price is decided upon. Make sure the plumbing company offers clear written quotes including any parts, start and finish times, and payment details. Also, before you choose a plumber make sure that the company fully guarantees their work!

I hope this guide helped you choose a great plumber, if you are looking for a reliable plumber and live in the Novato, California area please check out the links below:

Learn More »



Source: http://ezinearticles.com/?How-to-Choose-a-Plumber—3-Essential-Tips!&id=6263821

Author: [author]

House Renovation – 11 Tips on How to Improve Your Windows Dramatically

House Renovation – 11 Tips on How to Improve Your Windows Dramatically

Most older homes with aluminum windows look quite dated. Many were the standard silver alumina color or even more dated the bronze brown color. The problem is that these and other older colors do not match well with modern internal and external color schemes.

Replacing these windows is a big job and not cost effective for most renovation projects. However there is a very inexpensive way for you to do it.

Window color is often overlooked. Ive seen many expensive makeovers with new roof colors, walls freshly decorated and painted and beautiful landscaping. But the effect is let down by old windows of a color which just do not match.

There are now businesses which specialize in this service, but if you are on a budget then why not do it yourself.

1. Remove any fly screens or security screens.

2. Clean all surfaces to be pained. ie any part of the internal or external frame which you wish to change color.

3. Mask up all rubber, glass and surrounding wall surfaces using masking tape and newspaper. Make sure you use proper painters masking tape, anything else will be too messy and you will have a big clean up job.

4. Spray a light cote of a metal etching paint. This will adhere to the shiny alumina surface and prevent your paint from peeling off.

5. Repeat with a second cote. This usually dries quickly.

PS Remember to clean the nozzle of your spray can between coats buy holding it upside down and spraying until all that comes out is the clear aerosol gas.

6. Do the same as above for the screens. It's easiest to put some paper or cardboard down on the ground and support your screens a couple of inches from the ground. Walk around the screens as you spray to ensure you do not miss any little bits which will show up later on.

7. Once the etching is dry then apply the first of 3 coats of matte black automotive spray paint in a can. This is very inexpensive and best bought at your local automart type store.

8. Ensure you allow enough time between coats.

9. Watch and for wind and spray drift. You do not want to give your car a paint job. Clean up will be with mineral turpentine as its not a water based paint.

10. Most of the time is taken doing the masking up, so do not take on too many windows in one day. Try to get some help with the masking its a boring job.

11. Matt black gives a much better finish than a gloss; it is closes to the sheen of real powder coating. If it is done properly it will last for years.

Learn More »



Source: http://ezinearticles.com/?House-Renovation—11-Tips-on-How-to-Improve-Your-Windows-Dramatically&id=3495543

Author: [author]

Common Commercial Plumbing Problems and Tips to Prevent Them

Common Commercial Plumbing Problems and Tips to Prevent Them

Commercial plumbing systems are more complex than standard residential systems. They generally work harder and at a higher rate. For this reason, they commonly experience problems; sometimes on a daily basis. As a commercial property owner, it is important to ensure your building is up to code and maintaining a functional and safe plumbing system. Not only does this protect your investment and prevent devastating disasters and costly repairs, it also protects your guests and employees, and provides a safe and comfortable environment for everyone. Continue reading to learn some of the most common plumbing issues in commercial buildings, as well as, some helpful preventive maintenance tips.

Common Commercial Plumbing Issues:

Water Leaks

There are several areas that can experience leakages. Pipes, faucets, fixtures, and more can leak if they are defective or improperly installed. The most common are faucet leaks, which typically occur as a result of a corroded rubber gasket or O-ring. Keep in mind that leaks can happen wherever there is a seam in the plumbing. When seals wears off, loosens, or breaks, a leak can occur. In extreme cases, cracks and ruptures in pipes are the cause of water leaks.

Silent Leaks

Water leaks are tricky because they can start very small, just a single drip a minute, but then overtime, turn into large, costly disaster. There is a common plumbing issue known as silent leaks, wherein water leaks are hidden. Overtime, silent leaks become worse because no one knows about them and they are not repaired. These types of leaks can, and often do, cause a significant amount of structural damage. Toilets and underground piping are the most frequent spots for silent water leaks.

Clogged Toilets and Drains

Whether your commercial building is open to the public, or just employees, the bathrooms get a lot of attention. For this reason, plumbing clogs are a common issue. Unfortunately, not everyone follows the rules of what not to flush down the toilet when it is not their own. Drains too frequently become clogged in bathrooms, but also in employee breakrooms, commercial kitchens, gyms, and businesses like groomers and salons. Things like food, paper, leaves, and grease, are contributory to clogged drains.

Prevention Tips:

Discuss good plumbing practices with staff. For the general public, create posters to place in public restrooms and breakrooms demonstrating good plumbing practices.

Find a professional plumber and consistently use them for all your commercial plumbing needs. Be sure they are state-licensed master plumbers with at least 10 years of experience with commercial plumbing.

Stick to a routine plumbing maintenance and service schedule to ensure efficient and dependable performance, and to catch small problems before they can turn into large ones.

As soon as you are aware of an issue, have it resolved immediately. When it comes to plumbing, small problems can turn into big ones, overnight. And the bigger the problem, the more expensive and invasive it is to have it repaired.

Learn More »



Source: http://ezinearticles.com/?Common-Commercial-Plumbing-Problems-and-Tips-to-Prevent-Them&id=9834151

Author: [author]

DIY Home Renovation Tips – A Step by Step Guide to Home Renovations

DIY Home Renovation Tips – A Step by Step Guide to Home Renovations

When it comes to investment property renovations the question I always get asked is – “how much work should I do”? The answer to this question will change dramatically depending on each person and their current situation. Are you the kind of person that loves DIY (do it yourself) home renovations? Do you love researching cheap renovation ideas? Or does the thought of a month’s DIY home renovation make you feel sick? Only you can answer these questions but believe me there are huge advantages of doing minor renovations let alone a full month’s work on a property

So let’s assume that you have 2-5 weeks to complete your DIY renovations, what is a realistic goal to try and achieve? To a certain extent this will depend on your budget but you would be surprised at how much you can get done if you find some good cheap renovation ideas. My DIY renovation budget is the same for every project I do – I like to call it the “Spend as little as possible” budget! Below is a list of the most obvious and important things that you should look at when attempting a cheap DIY renovation.

Interior Painting

A fresh coat of paint is the easiest way to make a house feel new again. The great thing about painting is that everyone can do it and it’s such a rewarding job. I love watching the house slowly get transformed as each new wall is painted and best of all if you do it yourself it shouldn’t be too expensive.

RENOVATION TIP: If you’re going to paint the house beige don’t even bother! Property investors always make the mistake or choosing plain and boring colors. Paint the house as if you were going to be living in it. If you’re feeling really adventurous you could even include a feature wall.

Floors

Replacing the existing flooring is another way to make your property feel brand new. You can either replace the carpet or in some houses you can polish the floor boards that are under the carpet.

RENOVATION TIP: This is one part of the DIY renovation process that I would recommend hiring somebody to it for you (floor polishing &carpets). The professionals do such a quick, good and cheap job that it’s hard to make an argument for doing it yourself. To save some money you can rip out the old carpet and left over staples before the professional come.

Bathroom & Kitchen

These two rooms are very important when it comes to renovating your investment property. If you do have some money in your budget then the Bathroom & Kitchen are a pretty good place to spend it. How much work you do here is up to the individual but I would recommend trying to get both of these areas clean, modern and usable.

RENOVATION TIP: Rather than re-tiling you can use Tile Paint to great effect. I have used ‘White Knight’ tile paint over the top of outdated 80’s tiles and the results have been outstanding.

Fittings

Replacing old Light fittings, door handles and cupboard fittings is a great DIY renovation idea. It is a very easy and cheap way to create a more ‘modern feel’ in your Investment property.

RENOVATION TIP: Look at the expensive designer brands and then find good quality imitations that are a quarter of the price.

Garden

One full day in the garden and you can make a big difference to overall appearance of a house. Pull out some weeds, trim some branches, mow the lawns, sweep the driveway and suddenly your property is looking pretty good. You might be saying “Since when is sweeping the driveway considered DIY home renovation”? Well I don’t care what you ‘call it’ – Gardening, DIY, Renovations, Cleaning – the fact is that putting a day or two’s work into your garden will definitely make your house more attractive to potential renters and bank valuers.

RENOVATION TIP: This is a great part of the DIY renovation to get some help from family and friends with. Everyone has done some gardening at some stage and you can even turn it into a bbq event. This will make it more fun and easy as the whole family can come.

Exterior Painting / Render

This might not be your first priority but it will drastically improve the first impressions that people have of your house. If your property is a weather board then a few coats of paint is a great idea or if it’s a Brick house then rendering your property can make a massive difference. Render can turn an old and ugly brick house into a modern a beautiful place in a few days.

RENOVATION TIP: DIY rendering is an incredibly cheap way to improve the value of your house. It can be messy and laborious but the results are fabulous.

Hopefully there is something here for everyone. So my answer to the question “how much work should I do on my investment property”? Do as much as you can whilst spending as little as possible. In the perfect world you would complete all the ideas that I have mentioned in about month and for under a budget of $10,000. Is this a realistic DIY renovation goal? Yes I believe it is very achievable, especially if you (or someone you know) have a few ‘handy man’ skills. Remember that renovating you investment property should be fun and exciting. Best of luck.

Learn More »



Source: http://ezinearticles.com/?DIY-Home-Renovation-Tips—A-Step-by-Step-Guide-to-Home-Renovations&id=1314039

Author: [author]

Tips on How to Save in a Plumbing Service

Tips on How to Save in a Plumbing Service

Plumbing is a proficiency of working with tubing, pipes and plumbing fixtures for drinking water systems and the drainage of waste. The plumbing trade is a basic and substantial part of every residential economy due to the need for clean water, and proper collection and transport of wastes.

EQUIPMENT SAVING. There's equipment that is technologically advanced and helps plumbers fix problems without the usual hassles. You have to know what area of ​​your plumbing; plumbers are going to require working on and what items they need. Then you need to make sure you have not only the right pieces, but also worth pieces to use for the job. The quality of the items on the market varies when it comes to plumbing. Plumbing often will choose higher quality items to do the job right. If you do not know what these are you may want to leave it to the pro to pick them out.

TIME SAVING. When it comes to saving time in plumbing, numbers are going to charge you for the amount of time it takes to get the job done. You can cut down that time by taking a few steps before they get to your home. If the area where you need plumbing work completed is surrounded by all sorts of things that will have to be moved by the plumber, numbers are going to charge you for that time, as it is time on the job. As soon as you know they are heading out you should get to work cleaning the area where they will be working to make it easier and less time consuming.

Learn More »



Source: http://ezinearticles.com/?Tips-on-How-to-Save-in-a-Plumbing-Service&id=3752509

Author: [author]

Interview Tips for Electrician Jobs

Interview Tips for Electrician Jobs

Today many opportunities for electrician roles are often oversubscribed with well qualified jobseekers so it is important you can make yourself stand out from the crowd and to demonstrate in your interview that you are the best candidate.

If you carefully research the job and properly prepare for the interview, not only will you already be ahead of other hopefuls, but you will also make it a more relaxing experience for yourself.

Pre-interview

It is essential to do some research both on the company itself and the exact position you are applying for. Many people outside of the industry might think that jobs for electricians are all the same but of course there are a wide range of different skills and applications that can come into play.

It is easy these days to have a quick look online at a company's website to get an idea on the history, important person and unique ethos or characteristics that you might need to know about. It is also a good idea to know a little about the working management structures and hierarchy of the business too. This can be done by reading the company's marketing literature or seeking out news articles about them. It can also be really helpful to ask current or former staff, industry collections or a recruitment consultant for information on the company.

While in your day to day activities it is unlawful that you will be wearing your best suit, that does not mean you should underestimate the effect of dressing appropriately for the interview.

The interview

Many interviewers will chat to you at the start of an interview to help you feel at ease and make sure that they get as much information as possible within the time provided. All interviews are different and highly heavier on the person or persons conducting them but there are many factors that are common to most situations.

Questions about you previous work experience and where, when and how you got your qualifications are almost certain to be asked. Details of specialist skills will be important to mention even if you are not asked for them. Proving that you have good time keeping and can work under your own initiative are all likely to help you on the day.

Although all of this information may be on your CV, often people like to hear someone speak about themselves in person. Most job interviews come down to personality as much as the credentials listed on paper.

Practicing these parts of the interview for your preferred electrician position with a friend or family member at home can be a great idea even if it shows a bit strange to begin with. Get them to ask you typical interview questions concerning the job at hand. When answering, remember to provide details of specific experiences you have in the field.

A quick search online should yield some example interview questions specifically for electrician roles so take a look at these and think about how you would answer them. Avoid rehearsing any answers too thoroughly though. Interviewers want to feel that they are talking to a real person and not an automated answering machine.

Technical aspects

An interview for an electrician job role will almost certainly include some technical questions to test your knowledge and confidence. Practical applications of learning and skills is an essential part of any job and you must be prepared to explain yourself and show that you know what you are talking about.

Asking questions

Almost all interviews end up with the interviewer asking the candidate if he or she has any questions of their own. It is important to have one or two, although not too many, while also avoiding the obvious.

Asking about future development and potential opportunities for progressing your career usually go down well but if you can ask something specific company that you thought of when you did your background research then that can be a very good idea indeed.

Avoid asking about salies or monetary issues at this stage – while important, this is something which should be negotiated at a later date unless the subject is breached by the interviewer themselves.

Learn More »



Source: http://ezinearticles.com/?Interview-Tips-for-Electrician-Jobs&id=7598476

Author: [author]

5 Tips for Your House Renovation

5 Tips for Your House Renovation

House renovation can become a stressful time with conflicting suggestions, an overwhelming amount of choice, and rising costs. However, when planned out carefully, it becomes a pleasant experience watching your house slowly get a new look. Here are some tips that will make your house renovation less of a hassle and more of an enjoyment.

1 . Crosscheck the contractor : Getting the right contractor will set the tone for how your entire experience goes, so make sure you find someone well recommended. If they have provided references, make full use of these, call them, and ask about the contractor. This does not mean just his work skills but also how well he listens to the clients because you will be in constant contact with him.

2. Plan Ahead : This rule works well in any area of ​​life. Do not wait for the contractor to give you options. Browse the internet and talk to friends because the last thing you want is to end up spending a lot of money because you keep changing your mind.

3 . House Rules : During your home renovation, there will be a lot of strangers going in and out of your house who you can not keep an eye on. If you have any rules such as not smoking in the house, make it known right from the start.

4 . Details Matter : Make sure that every detail of the entire home renovation is taken down in writing by your contractor before you start with the work or put in your money. There is nothing worse than going into this harrowing time and then finding out that one part of your idea is not jotted down in your contract, so you have to end up paying an additional amount for it.

5 . Clean the Mess : It is extremely important that the renovation crew cleans up every single day regardless of whether they will come back and create another mess or not. In most cases, the renovation will create a huge amount of dust and if it is left untended to, it will enter your heating or cooling system. This can lead to any amount of health problems.

With these tips, you will find it a lot easier to go through your house renovation without losing your patience. The key, as stated above, is knowing what you want ahead of time. Once you know this down to the last detail, your renovation will go smoothly.

Learn More »



Source: http://ezinearticles.com/?5-Tips-for-Your-House-Renovation&id=7938486

Author: [author]